Frequently
Asked Questions
I can't figure out how to remove the LTZ400 gas tank to change the spark plug ?
The first thing you need to do is turn the fuel petcock to off and remove the fuel line from the valve. Next, remove the plastics that are covering the tank. They are held on by plastic body clips. The body clips are like plastic rivets. Use a small regular screwdriver and lightly pry up on the center heads to loosen them. They are only plastic, so be careful.
Leaking Gas Valve flooding engine?
The first thing you need to do is turn the fuel petcock to off and remove the fuel line from the valve. Next, remove the plastics that are covering the tank. They are held on by plastic body clips. The body clips are like plastic rivets. Use a small regular screwdriver and lightly pry up on the center heads to loosen them. They are only plastic, so be careful.
LT80 Engine Oil Issues ?
The first thing you need to do is turn the fuel petcock to off and remove the fuel line from the valve. Next, remove the plastics that are covering the tank. They are held on by plastic body clips. The body clips are like plastic rivets. Use a small regular screwdriver and lightly pry up on the center heads to loosen them. They are only plastic, so be careful.
Yamaha PW50 runs on full throttle only ?
The first thing you need to do is turn the fuel petcock to off and remove the fuel line from the valve. Next, remove the plastics that are covering the tank. They are held on by plastic body clips. The body clips are like plastic rivets. Use a small regular screwdriver and lightly pry up on the center heads to loosen them. They are only plastic, so be careful.
Hayabusa Water Pump Interchangeability?
The first thing you need to do is turn the fuel petcock to off and remove the fuel line from the valve. Next, remove the plastics that are covering the tank. They are held on by plastic body clips. The body clips are like plastic rivets. Use a small regular screwdriver and lightly pry up on the center heads to loosen them. They are only plastic, so be careful.
Vintage CT90 Timing Troubleshooting ?
The first thing you need to do is turn the fuel petcock to off and remove the fuel line from the valve. Next, remove the plastics that are covering the tank. They are held on by plastic body clips. The body clips are like plastic rivets. Use a small regular screwdriver and lightly pry up on the center heads to loosen them. They are only plastic, so be careful.
MotoHero beside you
Ask us a question
Feel free to ask any motorcycle services and custom questions through the contact form below.
We will answer as soon as we can.